Do you have a bedroom that could use a ceiling fan to cool it down Installing a ceiling fan on your own is relatively easy, if you are basically replacing a light fixture that is already in the appropriate location. Because a ceiling fan requires the same wiring as your light fixture, the only primary thing that requires to be done is to transfer the workbox that can handle the weight of the ceiling fan. Hanging your new ceiling fan on an established box that won't support the additional weight of the fan could end up in disaster. Before you get started with your project, go through the instructions for the fan you have bought, and be sure that you have all of the necessary tools.

When you find yourself hanging the fan on the cathedral ceiling, you may require to purchase additional parts for extending the fan all the way down lower. When you are prepared to install the fan, be sure that the circuit breaker is off so you wont get electrocuted. After eliminating the current light fixture, check to see if the installed workbox can manage the weight of your ceiling fan woodwork projects. In many cases, the workbox will not be able to hold the extra weight so you may need even more support. Including support to the workbox is not that tough if you have entry to the light fixture from the attic.

All you need to do, is nail a 2x4 within the ceiling rafters, so it touches the top of the workbox. Be positive that the 2x4 is anchored and then attach on the box to the wood. If you did it correctly, the excess weight of the fan really should be efficiently supported by the 2x4 wood and screws. furniture woodworking plans If you are incapable to do it from the attic or you have basically no attic, you will want to create a cross bracing in your ceiling. It is more hard to do and may not be that protected but its the best option if you have no attic admission.

After you have gathered the fan correctly, you are now all set to hang your fan. The difficult part is joining the wiring while holding the fan. It depends on the kind of fan you have, quite a few come with a bracket with a J hook while others have a holding frame. For most fans the wall switch will turn the unit on or off, as the chain will control the speeds. If you choose to also install a light kit with the fan, both can be operated by either chain or wall switch.

The next thing is to go by the wiring guidelines which are as simple as connecting two white wires, two black wires and two ground wires. And once you have finished the wiring, all you need to do now is affix the blades. As soon as that is completed, turn the breaker back on to check out the results.